Tag Archives: brocade

9.2 – Long Distance configurations – CWDM/DWDM

One of the most complex ways of implementing long distance connectivity is using CWDM or DWDM extension equipment. Reason being is that the technology is often fairly complex and diagnostics in case of troubleshooting is most often done on a layer 1 level which means you need to have extensive knowledge of not only the way Fibre-Channel operates on a FC-PI (Physical Interface) but also how it aligns to the standards described by the ITU.

Continue reading

Why FDMI is compulsory (or should be!!)

FDMI stands for Fabric Device Management Interface and is such an enormously cool feature and unfortunately one of the least used. From an operational management perspective FDMI provides a wealth of information to the fabric regarding the attached devices. The thing that flabbergasted me is that almost no device (HBA/Array) has this turned on of even has the functionality embedded.

Continue reading

Open Source Software (OSS) and security breaches in proprietary firmware

It is no secret that many vendors use open source software in their products and solutions. One of the most ubiquitous  is Linux which is often the base of many of these products and used as core-OS because of it’s flexibility and freely available status without the need of keeping track of licenses (to some extent) and costs.

These OSS tools have different development back-grounds and are subject to policies of the person (or people/companies) who develop it. This obviously results in the fact that defects or bugs may result in security issues especially when it involves network related applications. Recently the bugs in OpenSSL and Apache have gain much traction as some of these are fairly significant and can result in access breaches or denial of service.

Continue reading

5.1 ISL/E-port configuration – The right way.

To many it has always been a mystery what happens when you connect fibre-channel switches to each other and all of a sudden magic happens and you can have an host “talk” to an array or an other device on an other switch. The same mystery however applies when this doesn’t work and you see “E-port segmented, port disabled”. In later FOS codes you may see some additional cryptic reasons like “ESC mismatch” but to many this is as gibberish as particle physics.

This post explains most of the important settings on an Brocade switch port destined to become an E-port in either a standalone master or in a slave role as part of a trunk. I’ll also highlight the importance of some settings when it comes to virtual channel initialization on both short and long distance settings as well as things seen on the wire when an ISL is segmented due to a fabric configuration problem. This post also touches on C/DWDM connectivity in relation to Brocade ISL’s.

Continue reading